Machine for Manufacturing Plastic Bottle Making Machine For 0.2 - 2
Liter
Description
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the infrared pre heater.
4. High adjustability to enable the pre heater to preheat preforms
in shapes by adjusting the light tube and the length of the
reflecting board in the preheating area, and eternal temperature in
the pre heater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each
mechanical action , which will make the procedures turn into a
state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive
the action in stead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and
mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the Bottle Producing Machine.
8. Strong clamping force with high pressure and double crank links
to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to
make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance,
etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting.
15. Low rejection rate: less than 0.2 percent.
Pictures
Data
| Item | General Infomation | |
| Container | Theoretical Output | 2000pcs/hr |
| Max.container volume | 2L |
| Max.neck diameter | 50mm |
| Max.container diameter | 110mm |
| Max.container height | 320mm |
| Number of cavity | 2 Cav |
| Electrical System | Total Power | 30kw |
| Use Power | 25kw |
| Air System | Working Pressure | 1.0Mpa |
| Low Pressure Consuming | 1600L/min |
| Blow Pressure | 20-30kg/m3 |
| High Pressure Consuming | 1600L/min |
| Chiller Water | Opreating Pressure | 0.3-0.5Mpa |
| Temperature | 10-12°C |
| Flow Rate | 130L/min |
| Machine | Machine Dimension | 1.95*1.85*2.1m |
| Machine Weight | 1900kg |
| Feeding Machine Dimension | 2.15*1.45*2.45m |
| Feeding Machine Weight | 450kgs |
Plastic Bottle Manufacturing Machines---Our Products
1. Water treatment equipment---RO purified equipment, UF purified
equipment, Sand filter, Carbon filter, Water softer, Sea Water
treatment.
2. Filling Machine---3 in 1 Washing filling capping---for your
water,carbonated drink,juice,wine,vinegar, milk,tea and so on.
---250 to 2000ml bottle, 3.5-10L,11- 20L bottle (3-6gallon bottle)
---PET bottle, Glass bottle, PP bottle and Can
---Screw cap, Aluminum cap, Grown cap and three (four) twist caps
etc.
3. Labeling Machine---Stick label, Shrink sleeve label, Hot melt
Opp labels,Wet gule label
4. Printer---Manual code printer , Inkjet printer , Laser printer
5. Packing Machine---Shrink film, Cartons packing machine
6. Bottle Blowing Machine
7. Injection Molding Machine---for your cap and preform.
8. Subsidiary products for drink production---Bottle Washer, Bottle
Capper, Conveyor, Bottle Dryer, Bottle Warmer, Bottle Loading
system, Bottle unscrambler, CIP system, Bottle Cooler, Bottle
Sterilizer, Blending tank, Storage Tank, Sugar Melting Pot, Syrup
Filter Conveyor and so on.
